Hotline 0901.236.398
Hotline 0901.236.398
HomeVan LipuZSSV-E Pneumatic segment cutting ball valveZSSV-E SERIES PNEUMATIC V-TYPE HARD SEAT CUTTING BALL VALVE – VAN BI ĐIỀU KHIỂN ĐÓNG MỞ BẰNG KHÍ NÉN DÒNG ZSSV-E
Home ZSSV-E SERIES PNEUMATIC V-TYPE HARD SEAT CUTTING BALL VALVE – VAN BI ĐIỀU KHIỂN ĐÓNG MỞ BẰNG KHÍ NÉN DÒNG ZSSV-E
  • Danh Mục Sản Phẩm

ZSSV-E SERIES PNEUMATIC V-TYPE HARD SEAT CUTTING BALL VALVE – VAN BI ĐIỀU KHIỂN ĐÓNG MỞ BẰNG KHÍ NÉN DÒNG ZSSV-E

Giá: Liên Hệ

Liên hệ ngay để có giá tốt nhất!
0901.236.398
NHẬN BÁO GIÁ
Product name： ZSSV-E series pneumatic V-type hard seat cutting ball valve product model： LP12—100
Product description：
Ⅰ Summary
ZSSV-E series pneumatic V-type hard seat cutting ball valve consists of double action actuator,     V-type ball valve, 2/5way solenoid valve, limit switch box, manual tool and so on. It is received the outputting signals from DCS, PLC, ON/OFF switches and other control equipments. Then, the 2/5way solenoid valve is operating and switching the air channel to driving the piston in the cylinder of actuator. Therefore, the connecting rod box is operated by the piston making the traveling of the piston stem changed from linear rotation to the 0-90°angular displacement. At the same time, the stem is running that make the valve open or closed, which has finished the two ways controlling. Because it is following the   V-type trim, which has better sealing and cutting function. It is used for process controlling in the lots of industry areas, such as pulp paper, food, medicament, metallurgy, petroleum and chemistry, electric power ,sewage disposal industries and so on, especially for the medium of high viscosity and with fiber and small grain.

Ⅱ Main parameters and performance
◆Nominal pressure:
1.6Mpa；2.5Mpa；4.0Mpa
◆Working temperature:-20℃-150℃
◆Leakage: GB/T4213-92Ⅳ
◆Air supply pressure: 0.4Mpa~0.6Mpa
◆Control voltage: 24VDC/220VAC

Ⅲ Ordering demands;
1.When to make the order, please choose the correct model referring to the item Ⅳ   in the table. If not, you’d better provide the following information, such as the type, pressure, dimension, seal type, the main material, medium temperature, the control voltage of solenoid valve and others. The action type is formally air to open. If not, you could note it, including the special demands, such as in the anti-explosion area.
2.The choosing accessories;
Limit switches:
1) Contacted switches       2) Induction switches (24VDC/220VAC)
The material of connecting flanges;
    1)     A3(Carbon steel)      2) 304SS

Ⅳ The compiling specification of series products’ model;

Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Explain
Z
S
R
—
1
Z
Final controlling element symbol
2
S
Pneumatic piston actuator
3
Cylinder installing type
S
Upright installing
4
Plug structure
V
—
V-type
5
Nominal pressure
16
1.6Mpa
25
2.5Mpa
40
4.0Mpa
6
Control type
E
Cutting type
7
Action type
B
Air to close
K
Air to open
8
Nominal diameter DN(mm)
15
～
500
15、20、25、32、40、50、65、80、100、125、150、200、250、300、350、400、450、500
9
Seat type
Y
Hard seat
R
Teflon soft seat
10
Valve body material
P
CF8
M
CF8M
L
CF3M
11
Input signal range
D3
220VAC
D4
24VDC
12
Position limit switch
A
 Contacted switch
B
Induction switches(24VDC)
C
Induction switches(220VAC)
13
Name of manufacture
LP
Zhejiang Tongpu automatic control equipment CO., LTD.
(Wenzhou Lipu automatic control equipment CO., LTD.)

Ⅴ Safety 
ⅰWe make sure all the valves is very safe only if the material and pressure accord with the requirements in your order.
ⅱAccording to the 4th part in the national standard(GB/T17213-2005/IEC60534-1999) of control valves industry area, it is the examination and testing on duty. We have test and examined the pressure and material following the testing report so that we are sure the safety of valves. The technical demands as followed,

1. Material testing
The physical test and chemical composition of the material for producing control valves accord with the standard of control valve or the concerned requirements in the order.

2.the static pressure testing in the liquid
All the compositions of control valve, even no actuator, which must be finished the static testing in the liquid according to the concerned pressure. i.e. it is tested by 1.5 times to the rating pressure.

Ⅵ Principle of operation
The V-type cutting ball valve is made up of pneumatic actuator, valve body, solenoid valve, air filter, air channel components, connecting and fastening pieces and so on. It finishes the position controlling from full open to full close by the solenoid valve. Then, the signal (e.g., 24VDC, 220VAC) from the controlling instrument or manual tool operating will control the solenoid valve, which output the signal of air pressure at once to impulse the actuator so that it finishes the position controlling from open to closed by the wheel box to drive the V-type valve trim.

Ⅶ Installing, usage and maintenance
◆The position of installing the ball valve would be in the place as standing by the building platform 、a walking block ect. in order to   having the best watching、adjusting、Operating、maintenance and repairing.
◆The pneumatic V- type ball valve may horizontal fix or vertical installing.
◆When to install the valve body, the medium must be flow to in a direction from the arrows on the valve body. The control voltage is   either 24VDC or 220VAC.
◆You would be added to lube oil in the wheel box of the actuator and the joints for half year at least.
◆The waste materials should be removed before installation of piping systems. Once installed, the position of the valve body   must be   opened completely to sweep by blowing the wind into a pipeline.
◆There are two screws(M12 ～ M20)  on the upper end of the cylinder of the pneumatic actuator and the lower end of the box, which is   used for adjusting the position from fully open to fully close.

Ⅷ Storage
Control valve had better be kept in the room among 5℃-40℃ temp. and ≤90% in the humidity. You’d better make sure there are no corrosive characteristics and other bad components in the air.

Ⅸ Packing and transportation
The packing material must accord with the concerned packing standard and demands. The packing must be intact and whole. It should have the own symbol against rain or dust and how to lay up. You should prevent the strong shaking in order to protecting the packing well in the journey of transportation.

X、ZSSV-E pneumatic segment cutting ball valve (double acting & wafer connecting)

Nominal
Size
DN
Flow
Quotiety
(Kv)
Dimension
Flange:GB/T9119-2000
A
L
H
X
Valve
N·W
(Kgs)
D
C
K
E
n-1
Flange
N·W
(kgs)
series：1
series:2
20
 20
50
360
410
50
 10.4
105
16
75
27.5
26
4-14
0.85
25
25
50
360
410
50
 10.45
115
16
85
34.5
33
4-14
0.96
32
45
60
360
450
50
11.25
140
18
100
43.5
39
4-18
1.59
40
63
60
440
480
80
15.05
150
18
110
49.5
46
4-18
1.82
50
90
75
440
500
80
16.2
165
20
125
61.5
59
4-18
2.43
65
160
85
440
520
80
16.3
185
20
145
77.5
78
4-18
2.97
80
250
100
440
560
80
19.55
200
20
160
90.5
91
8-18
3.23
100
420
115
470
590
100
27.75
220
22
180
116
110
8-18
4.52
125
630
135
470
640
100
33.7
250
22
210
141.5
135
8-18
4.93
150
900
160
520
700
125
48.70
285
24
240
170.5
161
8-22
6.53

X、ZSSV-E pneumatic segment cutting ball valve (double acting & wafer connecting)

1.Segment                             2.Seat                         3.Shaft seal                                  4.Actuator box
5.Frame                                  6.Nut                           7.Compression ring                   8.Cylinder lid
9.Shaft                                    10.Bearing                11.Bady                                         12.Lock spring
13.O-type seal ring              14.Framer                  15.Position limitbswith box     16.Lower shaft
17.Lower shift bearing       18.End plate seal     19.End plate                                  20.End plate screw
21.Switch box U-type rod   22.Lid                         23.Needle                                      24.O-type ring
25.Axle F4 bearing               26.Axle                       27.Joint cross bolt                     28.Limited screw
29.Nut                                     30.Joint cross          31.Rod                                           32.Rod spring back-up ring                                    33.Air joint nut          34.Air joint body                                        35.Airfilter                  36.Piston rod bolt
37.Piston rod bolt washer    38.Limited bolt         39.Nut                                         40.Cylinder conjoin double end screw                41.Nut                          42.Cylinder                                 43.Y-typepistonrin                   44.Piston gallow circle
45.Piston rod                         46.Cylinder seal cushion                                                47.Cylinder brace lid

Ⅺ、ZSSV-E pneumatic segment cutting ball valve (double acting & wafer connecting)

 1A.Position of valve show cover             1B.Switch box cap                1C.Switch box connection joint   1D.coreend plate
1E.Switch box retroact shift                      4.Box                                        26.Axle                      35B.Air filter nut
35C.Air filter framer                                   5D.Air filter core                     35E.Air filter over coat
45.Piston rod
48.Piston rod gallow sheath                    49.Piston rod seal ring          50.Cylinder gallow lid circle nut                                                                51.Switch box and bolt
52.Spring washer                                      53.Box lid screw                    54.Washer               55.Frame bolt
56.Frame bolt spring washer                 57.Body with flange              58.Into air joint
59.Air pipe
60.Solenold valve                                    61.Solenold valve fix end plate          62.Solenold valve fix screw

63.Solenold valve guilder                     64.Solenold valve coil               65 Solenold valve connection joint                                                            66.Solenold valve signal line

Nominal
Size
DN
Flow
Quotiety
(Kv)
Dimension
Flange:GB/T9119-2000
Connect
screw dimension
GB/T901-88 class
A
L
H
X
Valve
N·W
(Kgs)
D
C
K
E
n-1
Flange
N·W
(kgs)
M×L
Series1
 Series2
200
1550
243
650
770
125
66.2
340
24
295
221.5
222
12-22
9.01
M20×305
250
2550
297
650
870
125
105.5
405
26
355
276.5
276
12=26
13.2
M24×360
300
3980
385
690
1050
160
197.55
460
28
410
327.5
328
12-26
17.14
M24×90
350
6350
420
730
1160
200
276.55
520
30
470
359.5
380
16-26
26.33
M24×100
400
8430
490
860
1300
260
362
580
32
525
411
430
16-30
33.59
M27×110
450
10820
600
1050
1400
260
459
640
35
585
462
484
20-30
43.86
M27×120
500
13400
640
1070
1420
260
568
715
38
650
513.5
534
20-33
61.07
M30×130

 

Địa chỉ cung cấp VAN LIPU:

Công ty TNHH Kỹ Thuật Lymaz hiện là đơn vị đại lý​ & phân phối sản phẩm Van LIPU độc quyền tại phía Nam Việt Nam.

Quý Bạn Đọc/ Doanh Nghiệp có nhu cầu mua hàng, vui lòng liên hệ

Tel/Zalo: 0901.236.398

Tel/Zalo: 0901.666.394

THÔNG TIN CÔNG TY

Công Ty TNHH Kỹ Thuật Lymaz

  • MST: 3502311942
  • Địa chỉ: Tổ 19, Khu Phố Thị Vải, Phường Mỹ Xuân, Thị Xã Phú Mỹ, Tỉnh Bà Rịa Vũng Tàu
  • Hotline / Zalo: 0901.236.398
  • Hotline / Zalo: 0901.666.394

Liên Kết

Giới Thiệu

Sản Phẩm

Dự Án

Tin Tức

Liên Hệ

CHÍNH SÁCH

Chính sách bán hàng

Chính sách vận chuyển

Quy định bảo hành

Chính sách đổi trả hàng

Hỗ Trợ

Close